EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Sequence Solar Demand Controller is really a remarkably economical solar controller designed for off-grid solar units. Depending on multiphase synchronous rectification technology, it ensures optimized Power conversion and program balance for a wide array of photovoltaic (PV) apps.

Essential Capabilities of your EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller technological know-how for top-quality photo voltaic energy harvesting. Key features include:

Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Exhibit with true-time knowledge checking.
A number of Load Handle Modes which includes guide and timer.
Complete Electronic Protections against overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Phase-by-Phase Guidebook to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Getting ready the Controller
Make certain all elements are integrated: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Verify the model selection and voltage scores match your photo voltaic panel and battery specs.
2. Mounting the Demand Controller
Pick out a properly-ventilated, dry spot close to the battery bank.
Protected the Tracer AN controller utilizing the offered mounting brackets.
Preserve proper clearance for warmth dissipation.
three. Wiring the Solar Charge Controller
Warning: Generally observe appropriate security protocols and make sure the process is driven off prior to connecting components.

Action 1: Connect the battery terminals to the demand controller (optimistic to good, negative to destructive).
Action 2: Connect the photo voltaic panel array for the PV input terminals.
Move 3: Connect the load terminals if employing a direct load connection.
Action 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Settings
Power to the controller by connecting the battery very first.
Use the Liquid crystal visit here display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, light Handle.
5. Checking and Knowledge Logging
The Tracer AN Series supports real-time checking using the MT50 remote meter.
Facts is usually logged by means of the RS485 communication port making use of application like Photo voltaic Station PC.
Distant monitoring can be done With all the EPEVER WiFi module.
six. Troubleshooting Widespread Problems
Challenge 1: No Ability Output

Check out battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Situation 2: In excess of-Voltage Protection

Confirm the solar array’s voltage score.
Regulate technique parameters if necessary.
Situation 3: No Battery Charging

Inspect PV wiring for continuity.
Validate MPPT configurations in the menu.
Great things about the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation ensures:

Larger Performance: Lowered Electricity losses throughout conversion.
Increased Reliability: Steady effectiveness below variable masses.
For a longer period Battery Existence: Reliable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification engineering can be an Outstanding option for optimizing solar energy generation and lengthening battery everyday living. By following the above set up guide, consumers can assure maximum efficiency and system longevity.