EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN Collection CONTROLLE

EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN Collection CONTROLLE

Blog Article

The EPEVER Tracer AN Series Photo voltaic Cost Controller is often a highly successful photo voltaic controller suitable for off-grid solar methods. Determined by multiphase synchronous rectification technology, it guarantees optimized Vitality conversion and technique security for a wide array of photovoltaic (PV) purposes.

Vital Features from the EPEVER Tracer AN Series Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Cost Controller know-how for top-quality solar Strength harvesting. Vital features include:

Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Superior MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery lifestyle.
LCD Show with genuine-time info monitoring.
Numerous Load Manage Modes such as manual and timer.
Complete Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Step-by-Move Guideline to Creating the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make certain all elements are included: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Verify the model number and voltage rankings match your solar panel and battery specifications.
2. Mounting the Demand Controller
Pick a properly-ventilated, dry area close to the battery financial institution.
Secure the Tracer AN controller using the provided mounting brackets.
Manage good clearance for warmth dissipation.
three. Wiring the Solar Charge Controller
Warning: Constantly comply with appropriate safety protocols and make sure the process is driven off ahead of connecting elements.

Step one: Hook up the battery terminals for the charge controller (favourable to beneficial, damaging to adverse).
Stage two: Link the photo voltaic panel array on the PV enter terminals.
Stage three: Connect the load terminals if using a direct load relationship.
Phase four: Double-Examine all connections for polarity and tightness.
four. Configuring the Controller Settings
Electric power around the controller visit here by connecting the battery to start with.
Make use of the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Manual, timer, light-weight Regulate.
5. Checking and Info Logging
The Tracer AN Collection supports genuine-time checking using the MT50 remote meter.
Details could be logged by using the RS485 communication port utilizing software program which include Photo voltaic Station PC.
Remote monitoring is possible Using the EPEVER WiFi module.
six. Troubleshooting Prevalent Troubles
Issue one: No Electric power Output

Verify battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Difficulty 2: In excess of-Voltage Protection

Validate the photo voltaic array’s voltage rating.
Alter program parameters if needed.
Challenge three: No Battery Charging

Inspect PV wiring for continuity.
Confirm MPPT settings inside the menu.
Advantages of the Tracer AN Sequence with MSR Technologies
The multiphase synchronous rectification engineering makes certain:

Greater Effectiveness: Diminished Electricity losses throughout conversion.
Enhanced Dependability: Steady effectiveness less than variable hundreds.
Extended Battery Existence: Steady and correct charging profiles.
Conclusion
The EPEVER Photo voltaic Cost Controller with multiphase synchronous rectification know-how can be an exceptional choice for optimizing solar power era and lengthening battery everyday living. By next the above mentioned set up information, end users can make certain maximum efficiency and system longevity.